The Ariens ARROW E 52R is a commercial stand-on battery mower built for tight sites, quick manoeuvring and long working days. Its 132cm rear-discharge deck, compact footprint and FusionCore swap-and-go batteries make it a strong fit for contractors who want clean results without petrol noise or emissions.
The foldable operator platform gives you stand-on speed in open areas and walk-behind control under branches, on slopes or in confined spaces. Suffolk Mowers supplies the full ARROW E series along with charger upgrades, spare batteries and the accessories needed to keep commercial teams running efficiently.
Built for Fast, Agile Commercial Mowing
The ARROW E 52R is built around a stand-on format that gives operators quicker reactions, better visibility and reduced fatigue during stop–start work. The shorter wheelbase and upright stance make it far more agile than a sit-on zero-turn, which is why commercial crews use stand-ons for high-traffic sites, dense tree lines and tricky landscaped areas.
The 132cm rear-discharge deck keeps clippings behind the mower, not out to the sides. That matters when working near paths, entrances, parked cars and public movement areas where side-throw simply isn’t acceptable. It also behaves well in damp grass where traditional side-discharge airflow can scatter material unpredictably.
Why the Stand-On Format Works
- Faster on/off movements when clearing obstacles or moving between work zones
- Better visibility for trimming close to kerbs, posts, fences and walls
- Reduced operator fatigue on stop–start or obstacle-heavy rounds
- Natural body suspension — legs absorb the vibration that a seat can’t
- Shorter overall length, easier transport and better access through gates
The foldable spring-mounted platform switches the machine into walk-behind mode for low branches or slopes up to 20°, giving more control where a stand-on stance isn’t appropriate.
FusionCore QuickSwap Battery System
The ARROW E 52R uses the same four 4kWh FusionCore batteries found in the ZENITH E range. Packs click in and out in seconds, which removes the downtime attached to fixed-battery systems. You can mow on two batteries and still transport the machine on one, giving real flexibility on varied commercial rounds.
- Up to 5 hours of cutting on a full set (conditions dependent)
- Swap batteries instantly to keep working all day
- Fast charger restores a full set in just over 5 hours
ECO mode comes into its own during lighter mowing where full blade speed isn’t required, extending usable runtime across a mixed route. Intelligent load balancing pulls from the fullest packs first before evening out the draw, keeping blade performance steady.
Deck Strength and Cut Quality
The 4.5mm welded steel deck is built to handle frequent commercial use. Anti-scalp wheels stabilise the deck on rough ground, and the rear-discharge airflow helps maintain cut consistency even when grass is damp or heavy. Brushless spindle motors deliver strong torque, and the slip clutch protects the drive system if the blade hits something solid.
Operator Control and On-Board Information
The hand controls are simple and responsive, with two driving speeds and an electric parking brake for secure stops on slopes or in tight areas. The LED interface shows battery levels, operating mode, hours and diagnostics without needing external devices.
Where the ARROW E 52R Sits in the Ariens Lineup
The ARROW E range sits alongside the ZENITH E series as Ariens’ professional battery platform, but the format is entirely different. The ARROW E 52R is the machine contractors choose when they want the agility of a stand-on and the clean clipping control of rear discharge. If a sit-on format is preferred, the ZENITH E models are the step up. If petrol is required for unrestricted runtime, the ARROW and ZENITH petrol machines sit in that tier.
This combination — stand-on handling, rear discharge and all-day FusionCore runtime — is what makes the ARROW E 52R unique in the Ariens electric lineup.
Compatible Accessories
- Additional 4kWh FusionCore battery packs
- Off-board charger for charging spare sets separately
- Fast charger upgrade
- Semi-pneumatic or Tweel tyre upgrades
- Suspension fork kit
- LED headlight and beacon kits
- Road-homologation lighting kit
Technical Specifications
| Specification | Detail |
|---|---|
| Drive System | Ariens FUSIONCORE brushless electric wheel motors with reduction gear, 2 x 5 kW max. |
| Max Speed (Forward / Reverse) | 17.7 km/h / 8.9 km/h |
| Deck Type | Rear discharge |
| Deck Material | 4.5 mm welded steel |
| Deck Lift | Foot pedal and hand lever |
| Number of Blades | 3 |
| Spindle Material | Forged aluminium |
| Spindle Drive | Direct electric drive, 3 x 3.5 kW max. |
| Cutting Width | 132 cm (52″) |
| Cutting Heights | 3.8 cm – 12.7 cm |
| Cutting Positions | 15 |
| Front Wheels | 13 x 6.5-6 semi-pneumatic |
| Rear Wheels | 20 x 10-10 |
| Driver Platform | Suspended, foldable |
| Interface | LED display with hour counter and 2 USB ports |
| Machine Weight | 561 kg |
| Length | 190 cm |
| Width | 137 cm |
| Height | 117 cm |
| Warranty (Machine) | 5 years / 1,500 hours (no hour limit in first 2 years) |
| Warranty (Battery) | 3 years |
| Battery Type | 56V Ariens FUSIONCORE Li-Ion swappable |
| Battery Capacity | 4 x 4 kWh (16 kWh total) |
| Number of Batteries | 4 quick-change packs |
| Charge Time | Fast: 5.3 hrs / Standard: 11 hrs |

Stihl







