Arbortec ATHV4400 Half Zip Waterproof Jacket – Hi-Vis Orange

The BreatheDry® Waterproof Jacket/smock is a lightweight technical garment with an array of features that have been created with the arborist in mind.

As a fully waterproof and breathable jacket, the Arbortec Waterproof Jacket conforms to EN343 Class 4,4 standards and incorporates an increased back length to shed water. The garment features a high collar with a waterproof zipper, inner placket, and neck protector.

Inside the collar is a large adjustable hood that has been designed to fit over a climbing helmet. The hood has a wired peak, a bungee volume adjuster drawcord, and a large hook and loop storm flap.

The sleeves are of generous length and have inner soft cuffs with thumb loops. Additional features include hook and loop tab fasteners to keep the cuffs watertight.

A large breast pocket with a waterproof zipper can hold a smartphone, and a further large pouch pocket can be accessed by long side zippers. The pouch pocket also acts as a ventilation point with mesh panels on the inside.

Further ventilation ports are concealed beneath zippers in the armpits and an access zipper at the bottom of each side of the garment, which is useful when wearing a climbing harness.

The Breathedry waterproof jacket, high visibility orange and yellow, conforms to EN 343:2019, Class 4,4 (Waterproof and Breathability) and RIS-3279-TOM Issue 19 2019.

SAFETY STANDARDS:

• BS EN 343:2019 Classes 4, 4, X
• BS EN ISO 20471:2013+A1:2016 Class 3
• BS EN ISO 13688:2013:2013+A1:2021
• RIS-3279-TOM Issue 2 2019 For Rail.

• Waterproof & Breathable 

MAINTENANCE:

We cannot stress enough how important it is to look after and clean your Waterproof Jacket in order to maintain its waterproof abilities.

Our garment fabric has a solid structure that physically stops water from passing through the membrane. The fabric breathes by absorbing and dissipating sweat through the diffusion of water vapour molecules.

When the fabric membrane becomes clogged with grease, dust, and dirt, it is very likely to allow moisture in and leak.

We recommend washing your Waterproof Jacket with NikWax TechWash following the guidelines on the NikWax packaging to clean off the grease and grime, followed by a re-wash with NikWax TX Direct. This will help to restore the garment’s waterproof properties.

KEY FEATURES:

High visibility conforms to EN 343:2019, Class 4,4 (Waterproof and Breathability) and RIS-3279-TOM Issue 19 2019.

EN 20471:2013+A1:2016 – Class 2 (Class 1 when worn without sleeves)

Pockets: 3 waterproof pockets, 1 upper chest pocket, and 2 lower pockets.

Hood: zip-off or storable collar, helmet-compatible with a wired front peak.

Vents: BreatheDry® vents, and pit zips.

Zip sides: ease of access to trouser pockets etc.

Taped seams: all seams taped to increase weather resistance.

Cuffs: tailed storm protection with Velcro adjustable, and Lycra thumb loops.

Length: longer back for water runoff, long sleeve length for high reaching.

Care Products